FLOG: Light Blue Bean

FLOG (Failure Log) Alert:

In a previous post, I started exploring the Light Blue Bean, also referred to as the Arduino Bean.  I had little difficulty getting it set up on my PC, and I was excited to try to my first real project, but I made a serious miscalculation by jumping right into a project without prototyping first (something that would have been easier to do with more than one Bean).  As a result, I ended up making a soldering error that caused the Bean to stop connecting to the power pin.  After several hours of playing around, taking things apart, and re-soldering did not solve my problem, I suspected that I'd damaged the gadget beyond repair.

Another error that I made, when attempting to solder header pins to my Bean (an idea that I took from Lucie's post), was making an assumption that Beans work in the same way as a typical bread board.  I mistakenly thought that all of the pins in column 1, for example, could be programmed in the same way as the first pin in that column. Since all of the holes in the first row of my Bean already had solder in them from my first project, I figured I'd just move down a row and start over. This did not work!  Only the first pins in each column are directly programmable via Arduino or an iOS device via the Bean Loader or the Tickle app.

Success at Last:

To make a long story short, +Craig Lyndes identified and repaired my power issue and encouraged me to try prototyping again, this time moving my header pins from the second to the top row!  I am happy to report that I've got my Bean working again!

Now, I am able to make LEDs blink on demand from a PC, iPad, or iPhone, and I have a working Bean to use exclusively for prototyping.  Although I will need to buy an additional one for a future project, I have learned a lot from this process!  Thanks +Lucie deLaBruere and Craig.